No, PVC flooring should not be glued with silicone. Silicone is not a suitable adhesive for PVC flooring as it does not provide a strong and durable bond. Instead, it is recommended to use a specific PVC flooring adhesive that is designed to bond with the material and provide a long-lasting installation. Using the correct adhesive will ensure that the PVC flooring is properly secured and will not lift or shift over time. **

To remove silicone from tiles, you can use a few different methods. One common method is to soften the silicone with a hairdryer or heat gun, then carefully scrape it off with a razor blade or putty knife. Another option is to use a silicone remover solution, which can be found at hardware stores. Apply the solution according to the manufacturer's instructions and then scrape off the softened silicone. Finally, you can also try using a silicone sealant remover tool, which is specifically designed to remove silicone from surfaces like tiles. **

To stick silicone to tiles, you will need to ensure that the tiles are clean and dry before applying the silicone. Use a silicone adhesive that is specifically designed for use on tiles. Apply the silicone to the desired area using a caulking gun, making sure to create a smooth and even bead. Press the silicone firmly onto the tiles and allow it to dry completely according to the manufacturer's instructions. **

No, it is not recommended to glue floor tiles with silicone. Silicone is not a strong enough adhesive to securely hold floor tiles in place, especially in high-traffic areas. It is better to use a specialized tile adhesive that is designed for floor installations to ensure a long-lasting and durable bond. **

To stick silicone on tiles, you will first need to clean the area thoroughly to remove any dirt or debris. Next, cut the tip of the silicone tube at a 45-degree angle and load it into a caulking gun. Apply a thin, even bead of silicone along the edge where the tiles meet, using steady pressure on the caulking gun. Smooth out the silicone with a wet finger or a silicone tool to ensure a clean finish. Allow the silicone to dry and cure according to the manufacturer's instructions before exposing it to water or moisture. **

No, it is not recommended to glue floor tiles with silicone. Silicone is not a strong enough adhesive to securely hold floor tiles in place, especially in high-traffic areas. It is better to use a specialized tile adhesive that is designed for flooring installations to ensure a durable and long-lasting bond. **

To stick wall tiles with silicone, first ensure that the surface is clean and dry. Apply a thin, even layer of silicone adhesive to the back of the tile, making sure to cover the entire surface. Press the tile firmly onto the wall, using spacers to ensure even spacing between tiles. Allow the silicone to dry and cure according to the manufacturer's instructions before grouting the tiles. **

Yes, silicone does stick to silicone. When two silicone surfaces come into contact, they tend to adhere to each other due to their similar chemical composition. This property makes silicone a popular material for creating airtight seals and bonding silicone-based products together. **